YAG800/1000 Model Economic Computerized Register Rotogravure Printing Machine

1.Usage:It is suitable for BOPP,PET,CPP.PVCD,al-plated film al-tissue and the compound film and paper with the same propertier. Its mechanicalspeed is 100m/min.
2.Main transmission device:The main transmission device adolpts alternating current frequency transforming vector to control the electric machine.
The speed of heat and rubber-plated network roller and network can be adjusted. Performance: To assure the tightness and looseness of the films in
the oven channels.
3.Mater-feeding devive; The Group 1and 2 Material-feeding devices adopt photoelectric correction deviation deviation device while the roll feeding is controlled through the automatic extension, The material-feeding device of compound film adopts photoelectric correction deviation device to control.
4.Rubber-plated device: The network rollers control the amount of ink scrapping . The thickness of the rubber can be adjusted freely through the ink
scrappers. While the rubber roller adopts dual air cylinder to higher the pressure while the pressure can be adjusted freely. It is also equipped with film
while stopping to lift automatically.
5.Structure of oven channel; The temperature in the oven channel through four passage intelligent thermo controller, equipped with inner cycling device.
The materials-protecting roller and the heat can rotate synchronically as well as the film-crossing operation scaffold.
6.Compound heat beat and press roller device: Compound heat and press roller device are heated through the hot oil to make the temperature of the heat
beat average and to save electricity. lmpression roller adolpts dual air cylinder. While the pressure can be adjusted freely. Performances: Save Electricity.
7.Material-collecting device: The material-collecting adopts combined rotation style device to collect the materials, while the roll-collecting device adolpts moment motor to collect the materials.
8.The material-feeding adopts magnetic ponder to control and the transducer to adjust the ponder power constantly.
9.Drive and extension sdopts magnetic ponder to control and the transducer to auto-matically adjust the ponder power constant.
10.The Material-collecting adopts moment electrical machinery to control.
11.The oven adopts centrifugal bolwer to blow and make suction. The electric tubes are equipped averagely at each blowing mouth to heat averagely while wind to cool the materials.

Main Technical Parameters:

Working Principle Drawing：